Přenosové zařízení SXS24
PZTS objektová zařízení pro DPPC

SXS24

Intended for the transmission of security and service data from electronic security switchboards.

SXS24/GPRS/NET Transmission equipment is intended for the transmission of security and service data from electronic security switchboards to a remote centralized security switchboard of RADOM SECURITY or RADOM SECURITY FIRE on GSM/GPRS and LAN/WAN (Ethernet) data networks.

Technical specification

  • Power supply

    230V ±10%/ 50Hz/ max. 30VA

    Back-up battery 6V/4,5Ah nebo 6V/12Ah

  • Inputs

    4 simply balanced circuits (possibility of direct connection of sensors) + 4 Binary Inputs potential / non-potential

    or

    8 binary potential / non-potential inputs;
    For equipment configuration, it is possible to select one of the listed variants;
    All inputs without galvanic separation.
    Connector: removable screw-in terminal block

    Input for connection of EZS telephone communicator - format ADEMCO CONTACT ID (SIA DC-05-1999.09);
    Connector: removable screw-in terminal block;
    Telephone formats processed: DTMF CONTACT ID;
    Required type of telephone number dialing: DTMF

    Configuration input RS232 for setting user-defined parameters;
    Connector: RJ14;
    Configuring software GSMConfig

  • Outputs

    Output for connection EZS alarm circuit, open collector 30V/1A, in event of disruption of LAN/WAN communication, output is in the NC state, without galvanic separation

    Output for connection EZS alarm circuit, open collector 30V/1A, in event of disruption of GSM/GPRS communication, output is in the NC state, without galvanic separation

    2 user-definable outputs, open collector 30V/1A, without galvanic separation

    Output Ethernet for communication with CSS; Interface type: 10/100 BASE-TX; Connector: RJ45

  • Telephone communicator switch

    In case of a drop out of the Ethernet network data from EZS is directed to an alternate transmission route by this switch (usually PTN)

    Option of forced switching of transmission route from the side of the CSS

  • Operating temperature range

    -5°C ÷ +55 °C

  • Dimensions (h,w,d)

    230 x 345 x 65mm

  • Coverage

    IP20

Description SXS24

Data is primarily transmitted on LAN/WAN data networks; during loss of connectivity to the CSS board, the equipment automatically switches to back-up communication through GSM/GPRS networks. When operating on a back-up data channel on GSM/GPRS, renewal of connection on the primary, LAN/WAN channel is regularly checked for. Following renewal of connectivity the equipment again automatically switched to this primary channel.

Information for transmission is obtained using a set of eight universal inputs, of which four can be connected as simply balanced or as binaries. The remaining four inputs are always binary. Other information for transmission can be obtained using a telephone communicator connected to the EPS switchboard output.
The equipment monitors the connection with the CSS during communication at adjustable intervals, on the currently active channel. Potential disruption of communication can be signaled by an output determined for this purpose.

Files to download

Chcete s námi spolupracovat?

Neváhejte a kontaktujte nás! Rádi s Vámi zkonzultujeme Váš projekt!

+420 466 414 211
Radom logo

Hardware and software development, design, production, supply, installation, service and technical support

Adresa


RADOM, s.r.o.
Jiřího Potůčka 259
530 09 Pardubice
Czech Republic

E-mail


This email address is being protected from spambots. You need JavaScript enabled to view it.
Copyright © 2024 RADOM, s.r.o.. All Rights Reserved.