FXM30 - blok FRB20
Railway Transportation Systems

FXM20 - CAB Radio

FXM20 CAB Radio is a device that is primarily intended for voice communication between the engine driver of the train and the traffic controller, station dispatcher or other parties in GSM-R(mobile communication in railway systems) networks, GSM-P (Public mobile operator) and in RRS (Railway Radio Systems).

Technical specification

  • Composition

    FRB20 (radio block)

    • charger (depending on dash Power supply)
    • GSM-R voice communication module
    • GSM-P voice communication module
    • GPS receiver

    FCB20 (control box)

    • control box FCB20
    • handset with PTT button
    • speaker
  • Power supply

    24V DC, 48V DC and 110V DC

  • Input power

    FXM20 - 50W

  • Coverage degree

    FRB20 - IP20
    FCB20 - IP54 – front panel, IP20 - Other surfaces

  • Antenna connectors
    • 1xSMA connector for antenna in the GSM (900MHz) band
    • 1xSMA connector for antenna GPS
    • 1xTNC connector for antenna GSM-R
  • Communication interface

    FRB20

    • 1x RS422/485 - FCB20 connection
    • 1x RS422 - ETCS connection
    • 1x RS232 - diagnostic port
    • Binary (1x IN / 1x OUT)

    DMI (FCB20)

    • 1x RS485 - connection FRB20
    • 1x RS485 connection RRS radio block
    • 1x RS232 optional for updating firmware, reading off diagnostic data, configuration of equipment for connection of identifying device for engine driver
  • Operation in RRS system when using
    • interconnection with logic box VL47 analog radio station VL47
    • duplex radio station VR47 of RRS system
    • Simplex radio station VR49 ofRRS system

    or

    • intercon. with simplex and duplex RRS radio block FAB20 of MTR10 equipment
  • Expansion options
    • data communication through data cards KN35017-2
    • Reader for authentication of engine driver using contact-free chip cards (Mifare/DESFire)
    • data interconnection with ETCS system (transmission of train number)
  • Dimensions (h,w,d)

    FRB20 - 225 x 130 x 220mm

    FCB25 - 115 x 290 x 65mm

  • Weight

    FRB20 - 5kg

    FCB20 - 2kg

  • Standards and authorizations

    EN 50155, EIRENE FRS v7.0, EIRENE SRS v15

Description FXM20 - CAB Radio

When operating in the RRS mode, the equipment can work together with the VS47 vehicle unit or with FAM10 manufactured by our company. When working with VS47 it replaces the original V047 control box.

In addition to voice communication, FXM20 equipment enables, in GSM-P networks, transmission of data via GPRS data transfers, between the train and stationary infrastructure (two-way communication). Within the framework of the RRS network, it is possible to implement duplex voice connection, identification transmission, and selective communication with the chosen party and potentially transmission of routine reports.
In the event that the train locomotive is equipped with the ETCS (Ansaldo) system, the FCB20 control box takes the train number from this system. The FXM20 can be fitted with a reader for identification of the engine driver in the Mifare/DESFire system.
CAB Radio FXM20 is designed as a modular system, whose individual blocks are interconnected via an RS485 serial collector. The FXM20 is equipped with:

  • FCB20 control box
  • Voice transmission unit
  • Simplex /duplex data transmission RRS (Railway Radio Systems) radio station unit

The train locomotive is usually fitted with two FCB20 control boxes, depending on the type of vehicle, whereas only one of these is active at any one time. The control box, in the direction of the RRS system, is equipped with an interface that is the equivalent to the existing interface of the VO47 control box, which it can replace.

FXM20 is functionally separated into two independent parts:

FRB20 Radio block

The FRB20 enables voice communication in the GSM-R and GSM-P networks. For data transmission, the FRB20 block can be expanded with a data module that facilitates data exchange between stationary infrastructure and the mobile equipment. GPRS technology is used for communication.

Ovládací panel DMI

Slouží jako uživatelské rozhraní strojvedoucího pro ovládání FXM20. Pro hlasová volání je k DMI připojen mikrotelefon s klíčovacím tlačítkem (PTT) a reproduktor.

Nabízíme dva typy ovládacích panelů.

FCB20 Control Panel

The FCB20 control panel acts as a user interface for the engine driver for controlling the FXM20. It is fitted with a graphic LCD display, 240 x 128 points with backlighting. The front panel is equipped with a backlit keyboard with adjustable light intensity. For voice calling, a handset with PTT button a speaker is attached to the control box.

Ovládací panel FCB25

Barevný grafický LCD TFT displej s rozlišením 800 x 480 bodů, fóliová klávesnice s regulací intenzity podsvětlení s 23 ovládacími tlačítky a samostatným tlačítkem pro nouzové volání.

Files to download

Chcete s námi spolupracovat?

Neváhejte a kontaktujte nás! Rádi s Vámi zkonzultujeme Váš projekt!

+420 466 414 211
Radom logo

Hardware and software development, design, production, supply, installation, service and technical support

Adresa


RADOM, s.r.o.
Jiřího Potůčka 259
530 09 Pardubice
Czech Republic

E-mail


This email address is being protected from spambots. You need JavaScript enabled to view it.
Copyright © 2024 RADOM, s.r.o.. All Rights Reserved.